Lathe Machine New

5C 5 Collet Chuck Plain Back for Lathe Machine, #0269-0010

5C 5 Collet Chuck Plain Back for Lathe Machine, #0269-0010
5C 5 Collet Chuck Plain Back for Lathe Machine, #0269-0010
5C 5 Collet Chuck Plain Back for Lathe Machine, #0269-0010
5C 5 Collet Chuck Plain Back for Lathe Machine, #0269-0010
5C 5 Collet Chuck Plain Back for Lathe Machine, #0269-0010
5C 5 Collet Chuck Plain Back for Lathe Machine, #0269-0010
5C 5 Collet Chuck Plain Back for Lathe Machine, #0269-0010
5C 5 Collet Chuck Plain Back for Lathe Machine, #0269-0010
5C 5 Collet Chuck Plain Back for Lathe Machine, #0269-0010
5C 5 Collet Chuck Plain Back for Lathe Machine, #0269-0010
5C 5 Collet Chuck Plain Back for Lathe Machine, #0269-0010
5C 5 Collet Chuck Plain Back for Lathe Machine, #0269-0010

5C 5 Collet Chuck Plain Back for Lathe Machine, #0269-0010   5C 5 Collet Chuck Plain Back for Lathe Machine, #0269-0010

Plain Back, Recessed 3.740'' x 0.184'' Deep. Can be used on lathe and grinding machines. Plain Back, have to choose proper back plate to connect with your machine.

Should be used with back plate (adapter) to connect with your specific lathe spindle. Can use any size 5C Collet: Round collet :1/16 1-1/8"; Hex collet:1/8" 7/8"; Square Collet:1/8" 3/4. Scroll and pinion design just like 3-jaw chuck, operated with chuck key. Scroll & pinion precision machined and hardened. Please note that you need to confirm the taper of your lathe using this 5C collet chuck is 14°15' before you place an order.

Otherwise, the run-out will not be accurate at all. Usually, when a lathe has been running for a few years, its taper becomes not as accurate as a new lathe, which causes inaccurate run-out when operating the 5C collet chuck.

THE METHOD OF MEASURING 0269-5C COLLET CHUCKS. Check the runout of lathe spindle first. Adjust the runout value of nose within 0.004mm; of cylinder or taper within 0.004mm shown asbelow. Then put the 5C chuck onto the lathe spindle nose, with the setting hole at the right position to fix each other While measuring, we used the screw lock device shown in picture-1. We did not have cam lock device shown in picture-2.

They work theoretically the same, by different methods. After putting the 5C fixture into the measuring equipment, enable the screw lock or the cam lock to work with the chuck on the measuring equipment. Please be noticed to tighten the cam screws in multiple strokes crossly. Approach the surface of the taper hole with a micron indicator; then rotate the measuring equipment slightly.

Reading and noting the micrometers value. Tighten the one or two cam screws to correct the 5C fixture, until the runout value within 0.006mm. Applying the standard 5C measuring bar, use two lock gears to tighten it slightly.

And assure the run-out of the 5C fixture orifice, 0.015mm. New: A brand-new, unused, unopened, and undamaged item in its original packaging (where packaging is applicable). Should you have any question please feel free to call 647 931 2564 or 647 933 1588. Company Warehouse U-13, 95 West Beaver Creek Rd. Richmond Hill, ON L4B 1H2 Canada Tel.

We will choose a carrier unless you indicate a preferred method. Our HST number is available upon request. Listing and template services provided by inkFrog. The item "5C 5 Collet Chuck Plain Back for Lathe Machine, #0269-0010" is in sale since Wednesday, February 25, 2015.

This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Chucks". The seller is "quality_machine_shop" and is located in TORONTO, ONTARIO. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia, Japan.

  • Brand: Not specified
  • MPN: Does not apply
  • Model: #0269-0010
  • UPC: 641799799739


5C 5 Collet Chuck Plain Back for Lathe Machine, #0269-0010   5C 5 Collet Chuck Plain Back for Lathe Machine, #0269-0010