Programs originally written for Yasnac control also run well for machines with new MS-Tech control. The MS-Tech CNC control comes with the following major functions.Automatic mode for running NC program, including, single-step, optional stop, block skip, restart functions, etc. Edit mode for CNC program editing, including find/replace, G-code help, M-code help, go to a line/block, etc. MDI (Manual Data Input) mode for entering and executing CNC commands block by block, which may be selected from command history listing. Manual mode for homing, jogging by hand-wheel or by key, etc. Setup mode for tool offset and work offset data editing including offset measurement function, etc. Service mode for machine diagnosis, including ladder logic diagnosis, error message tracking, etc. Simulation function for verifying CNC programs before running.
Standard G-code and M-code programming per convention, and canned cycles are included. Search program either by block number or by line number. Inch/mm automatic conversion for tool and work offsets. The following features have been designed to enhance the user experience. Built-in 3-D tool path display.Program down/up load from/to USB flash disk or RS-232C com port. Super user-friendly -- most people master the operation within 20 minutes. MS-Techs CNC control is a combination of state-of-the-art quality hardware and advanced software for CNC machines. Each component of MS-Techs hardware and software was designed for. Forward installation and user-friendly operation.
As a result, MS-Techs Mori Seiki SL Series CNC retrofit. Contains both CNC and PLC components needed to make the CNC machine fully operational. MS-Tech CNC control sends +/- 10V command signals to servo and. MS-Techs CNC system interfaces with existing motors and drives seamlessly. Servo or spindle drive on the machine has problem.Please contact MS-Tech for retrofit solution with new motors and drives. You will be surprised at how easy the control system is to install and use. The following is provided to assist your installation process. Cabling between major control units provided. MS-Tech offers an optional, quick installation service for its CNC control package, designed to minimize machine downtime.
Typically, two MS-Tech technicians can have a machine retrofitted and operational within 4 work days from arrival. The following features are intended to help retrofitters to expedite and simplify the retrofitting process. MS-Techs CNC control package has the following features.Built-in PLC and ladder programming utility for I/O control. Built-in PID tuning utility for servo performance tuning.
Built-in diagnostic utility for system trouble-shooting. Built-in macro for automatic tool change control. MS-Tech CNC is capable of doing complicated machining jobs with ease of operation and programming. Our user interface was designed to provide operators with the greatest convenience for day-to-day use -- a typical operator can learn how to use MS-Tech's CNC system within 20 minutes. A full PDF operator manual will be provided with the CNC package.
A customer wrote to us: As we bring in additional employees and more people interact with the MS-Tech controls, the feedback is always very positive and everyone remarks how easy and user-friendly the controls are to use. Servo drives and motors are not included in MS-Techs listed price. MS-Techs CNC control system can interface directly with your pre-existing motors and drives for. Bullard 42 Vertical Turret Lathe.
However, new MS-Tech servo motors and drives can be ordered to prevent issues from outdated and worn drives, as well as save time by directly interfacing with MS-Tech's CNC solutions. Full Parts List and Description.
The following basic parts are always included in each CNC package. A closed unit ready for being installed in front of a machine. The OPU consists of a built-in 15 LCD color display, an MDI input device, a manual pulse generator, and pushbuttons of Emergency-Stop, Cycle-Start, Feed-Hold, etc. A self-cooling, highly-reliable, industrial-grade motion control computer with a solid-state hard drive, built-in PLC, etc.
It is a control signal connection unit for connecting to/from OPU, MCU, servo drives, spindle drive, relays, and magnetic contacts. It has built-in optically-isolated home switch inputs, limit switch inputs, general purpose inputs and outputs. Power supply unit #1 (PSU1). For supplying power to OPU, MCU, and SCU.
Power supply unit #2 (PSU2). To be attached to the bottom of the OPU. For controlling solenoid valves and receiving input signals. One set of I/O modules for DC inputs, AC outputs, DC outputs. The actual types and quantities are depending on the machine to be retrofitted.
Licensed MS-Tech CNC control software. Pre-installed in the MCU for your specific type machine.
One set of customized machine data files. MS-Tech will install the right machine data files for the type of the machine you ordered. Operator manual in PDF format. Integration manual in PDF format.
Step-by-Step installation guide in PDF format. For connection from SCU to OPU.
For connection from MCU to OPU. For connection from MCU to SCU. For connection from SCU to IOX.
Note: All attached images of. This sale of MS-Tech CNC retrofit package is for. Bullard 42 Vertical Lathe ONLY. No actual Bullard 42 Vertical Lathe machine for sale. Packages and services include only the aforementioned items.
If the machine has other problems or requires additional parts ex. We are able to provide a retrofit solution for almost any type of machine and any brand. The item "CNC Retrofit Package for Bullard 42 Vertical Lathe Machine" is in sale since Friday, December 2, 2016.
This item is in the category "Business & Industrial\Other Business & Industrial". The seller is "ms-tech-corp" and is located in Corona, California. This item can be shipped worldwide.