4 Inches (100 mm) Tilting Rotary Table - 4 Slots & 65 mm 3 Jaw Self Centering Chuck. 4 (100 mm) Tilting Rotary Table with a 65mm- 3 Jaw Self Centering Lathe Chuck for Milling Machine. This Whole Package Includes below. 4 / 100 mm Tilting Rotary table. Of a high quality 65 mm 3 Jaw self centering Chuck.
Of a back plate which has holes in a manner that it can be fitted on to a 4 slot Rotary table. 3 set of T nut to clamp / tighen the Back Plate with the Tee slots of the Rotary Table. When the table is at 90 degree (vertical position) with the chuck mounting- the centre height of this comes nearly 55 mm. 4 / 100mm Rotary Table Tilting 4 Slots.
Features to tilts between 0- 90 Degrees & can be locked at any position. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation turns the table by 10 Degrees.
Centre Height in vertical position: 2-5/8 (66 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. A Precision work positioning device used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis.
Rotary tables are most commonly mounted "flat", with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it "flat" on a 90° angle plate), so that it rotates about a horizontal axis. In this configuration a tailstock can also be used, thus holding the work piece between centers. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine.Milling curved profiles and angled faces relative to a centre line. Drilling or milling to polar co-ordinates and, when mounted vertically with a tailstock they can be used to machine shafts or spindles. The versatile units can also be used on drilling, boring or slotting machines permitting an even greater range of operations. Machining - To establish the initial work piece position simply loosen the zero Collar locking handle and rotate the zero collar anti-clockwise for about half A turn. The worm is now disconnected from the worm wheel drive, the table is Free to turn independently to the crank handle and the work piece may now be Accurately aligned.
To re-engage simply turn the zero collar in the clockwise Direction and re-tighten the locking handle. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don't have the power to drive large twist drills (>0.500/>13 mm).
To cut complex curves (with proper setup). To cut straight lines at any angle. The item "Rotary Table Tilting 4 / 100mm with 65mm Lathe Chuck for Milling Machine NEW" is in sale since Wednesday, March 11, 2020.This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables". The seller is "chromeeng24x7" and is located in DELHI, DELHI. This item can be shipped to United States, Canada.